So, you are about to perform Netgear extender setup process, right? Well, the extender setup process requires you to have a WiFi-enabled device. But, what if you don’t have the device? How would you setup Netgear extender? Don’t feel out of luck! You can easily setup Netgear extender via hardwired connection.
Yes, you read that right! This particular post will ring up the curtains from the Netgear extender setup process without using WiFi-enabled device. Let’s take the plunge!
Instructions to Setup Netgear Extender Without a WiFi Device
Here are step-by-step instructions for setting up Netgear extender without a WiFi-enabled device:
Power on Your Netgear Extender
First things first, plug in your Netgear extender into an active and non-damaged power source. Be sure that your device is receiving continuous and steady power supply.
Make a Hardwired Connection
Once you turn on your WiFi range extender, create an Ethernet connection between the Netgear device and your router. Now what you have to do, use desktop or laptop and connect a LAN cable to it properly. In order to ensure whether the cable is properly connected to your PC or laptop or not, access the mywifiext net login page.
Make sure that you have an active internet connection. Then only you can have access to the mywifiext.net login page.
Access Your Netgear Extender
As soon as you made the hardwired connections between your devices, launch your preferred web browser. Once done, Head over to the browser’s address bar and enter www.mywifiext.net web address without making any typing errors.
Be certain that you aren’t using the browser’s search bar for entering www.mywifiext.net. Also, the web browser you are using must be free of browsing history, cache, and junk files.
Setup Netgear Extender
Now, the next step is to select a WiFi network whose range you want to extend. And, set up a secure and strong password for the extended WiFi network.
Apply the Setting Changes
Now, it’s time to set up the security settings for your extended WiFi network. Navigate to Netgear Genie setup page, follow the on-screen instructions and configure your range extender’s WiFi settings as per your needs.
You’re All Done!
Now, unplug your Netgear extender and find the best location for your device. Ensure to place your Netgear extender away from interference-creating WiFi devices.
Note: It is essential to place your Netgear extender closer to your router but not too close that their signals clash.
That’s how you can easily setup Netgear extender without using a WiFi-enabled device. In the event that you are facing issues while setting up your Netgear extender, then use the fixes outlined underneath:
Power Cycle Your Netgear Extender
Firstly, disconnect your Netgear extender from your router.
Then, unplug your WiFi extender from its wall outlet.
Wait for 15 minutes.
Plug your range extender back in.
Let the extender’s power LED becomes green and stable.
Check your internet connection if it is working fine, access the mywifiext setup page.
Locate Your Devices Correctly
Yes, you read it absolutely right! After or before configuration – the location of your Netgear extender and router natters a lot in well-functioning of your devices. Just in case, you place your router in a congested or lower area, then your range extender won’t be able to receive active WiFi signals from it, resulting in non-configuration of your Netgear device. So, it is always suggested to place your Netgear extender and router at the center-most location in your home.
So, have you relocated your devices? Get into the Netgear Genie setup wizard using mywifiext.net and see if you can access the settings of your extender.
Out guide on how to configure Netgear extender without a WiFi-enabled device ends here. If you need any assistance, feel free to drop your queries into the comments section.